Table of Contents
Advertisement
•
Ensure the augers and fan are in good working
condition and rotate freely.
•
Ensure the chute UHMW is not damaged or
worn and the chute rotates freely.
•
Ensure the chute drive gears are not damaged
or worn.
•
Ensure the chute retaining rollers rotate freely.
•
Ensure the driveline integral shields are in good
condition and rotate freely.
•
Inspect that all bolts and screws are in position
and are properly torqued.
•
Check blade wear and if worn reverse it or
replace.
•
Ensure the deflector chute shields are in good
condition.
•
Ensure the tractor PTO shield is in place and in
good condition.
•
Inspect the condition of the auger drive chain
and tensioner.
Do not put hands or feet near the rotating fan. Fan contact can result in
serious injury or even death. Stay away until all motion has stopped and
the snow blower is securely blocked up before removing material,
performing service, and making repairs.
SDX-102 05/19
© 2019 Alamo Group Inc.
OPERATION
(SSB-6)
Operation Section 4-17
Advertisement
Table of Contents
