Table of Contents
Advertisement
If the tractor's hydraulic pump is not independent of
the tractor PTO, or if the tractor PTO has to be run
to have hydraulic power, disconnect the snow
blower driveline from the tractor PTO output shaft.
Secure the driveline to the implement deck to
prevent driveline damage or loss during transport.
If the Snow Blower is equipped with a Folding
Truck Loading Chute always follow these steps
before transporting the snow blower or putting it
into storage.
1. Rotate the chute so it faces fully forward so the
folding chute rest sits fully on the rest support.
2. Retract the upper chute section and deflector
until the deflector comes to rest in the notches
of the folding chute rest. This provides
additional stability to the chute during transport.
In wet conditions where there is a likelihood of material collecting on the Implement, make
certain that this material is removed before traveling on public roadways.
14.1 Transporting on Public Roadways
Never allow children or other persons to ride on the Tractor or Implement.
Falling off can result in serious injury or death.
Make certain that the "Slow Moving Vehicle" (SMV) sign is installed in
such a way as to be clearly visible and legible. When transporting the
Equipment use the Tractor flashing warning lights and follow all local
traffic regulations.
SDX-102 05/19
© 2019 Alamo Group Inc.
OPERATION
(SG-6)
Operation Section 4-34
(SG-10)
(STL-7)
Advertisement
Table of Contents
