Table of Contents
Advertisement
Never crawl under a raised Implement supported solely by the Tractor 3-Point hitch.
Release of the control lever or mechanical failure will result in the Implement falling and
possible injury or death. Always securely block up the Implement before crawling
underneath to perform repairs and service.
7. DRIVELINE ATTACHMENT
The driveline yoke and tractor PTO shaft must be dirt free and greased for attachment.
To connect the snow blower driveline to the tractor,
lift the PTO output shaft off of the PTO holder A.
Twist the driveline yoke collar and align the grooves
and spines of the yoke with those of the PTO shaft.
Push the driveline yoke onto the PTO shaft, release
the locking collar, and position the yoke until the
locking collar balls are seated onto the PTO shaft.
Push and pull the driveline back and forth several
times to ensure a secure attachment.
Lift the PTO holder, rotate and lower it into the in
service position.
RDX-117 06/20
© 2020 Alamo Group Inc.
OPERATION
(S3PT-19)
Operation Section 4-11
Advertisement
Table of Contents
