Table of Contents
Advertisement
10. Remove existing plug in the cover plate and replace with seal #331-858 using the proper seal driver.
11. Clean both machined surfaces of gearbox halves.
12. Apply a 1-16" bead of Loctite® 515 anaerobic flange sealant or equivalent to one of the machined surfaces
just cleaned.
13. Reinstall cover carefully aligning dowel pins.
(Gearbox halves should go together easily). DO
NOT FORCE TOGETHER).
SDX-102 05/19
© 2019 Alamo Group Inc.
MAINTENANCE
Maintenance Section 5-11
Advertisement
Table of Contents
