3-Point Hitch Kit Mounting - Schulte SDX-102 Operator's Manual

3-Point Hitch Kit Mounting

NOTE: Do not tighten any fasteners until the complete three-point hitch is in place. Refer to the illustration of
the three point hitch in the part's manual for additional detail.
1. Insert Lower Link Arms (1) into the tubes of the housing and secure using two 1" x 5" bolts and locknuts
(2).
2. Attach Top Link Arm (3) to the main frame using two 5/8" x 2" bolts and locknuts
NOTE: For machines with the 1000RPM Reducer Gearbox, ensure the stake arms are fully extended as
shown.
3. Assemble the two 3-point Hitch Braces (5) to the Lower Link Arms (1) using two 1" x 5" bolts and locknuts
(6) and to the Top Link Arm using 1" x 6-1/2" bolt and locknut (7).
SDX-102 05/19
© 2019 Alamo Group Inc.
ASSEMBLY
Assembly Section 3-2
(4).