Table of Contents
Advertisement
1000 RPM REDUCER GEARBOX REMOVAL/INSTALLATION
Reducer Gearbox Removal
1. Disconnect
all
components
snowblower and disconnect the snowblower
from the tractor
2. Disconnect the driveline from the gearbox
spline shaft, and remove the cone.
3. Remove the four bolts that hold the Reducer
Gearbox onto the coupler.
NOTE: BE
CAREFUL
GEARBOX WHEN YOU REMOVE THE
BOLTS.
IT
WILL
POTENTIALLY CAUSING INJURY.
SDX-102 05/19
© 2019 Alamo Group Inc.
MAINTENANCE
from
the
TO
SUPPORT
THE
ROTATE
DOWN
Maintenance Section 5-4
Advertisement
Table of Contents
