Specifications - Sensata dimensions 12NP18 Owner's Manual

Specifications

WARNING: The converter/inverter is intended to recharge batteries. The battery that is connected to this
product is only suitable if it complies with the given battery standard for that battery type and is provided with a
battery management system that will monitor and control the electrical and thermal health of the battery during
charging. When installing this inverter, the battery is to be verified as in compliance with the applicable battery
standard.
All ratings assume 12.6 VDC nominal voltage, 25°C ambient temperature, and that the inverter is mounted in free
air. Specifications are subject to change without notice.
Inverter
Enclosure Type
Output Power (Watts Cont.)
Output Current (Amps AC Cont.)
Input Current (Amps DC Cont.)
Peak Power (Watts)
Peak Output (Amps AC)
Motor Starting Rating (hp)
Weight (lbs.)
Dimensions in. (L x W x H)
Output Voltage (VAC)
Output Frequency
Output Waveform
Input Voltage (VDC)
Nominal Input Voltage (VDC)
Operating Temperature
Peak Efficiency
DC Input Capacitance
AC Input Voltage Range (VAC)
Nominal Input Voltage (VAC)
Input Current (AAC)
Output (ADC)
Minimum Req'd Battery A-hr*
Max A-hr**
Bypass (AAC)
* For optimal charging, the inverter amp hour setting should match the amp hour rating of the connected battery.
** Each inverter amp-hr setting can be adjusted with the optional LCD or with RV-C CAN.
Page 6
12NP18 12NP20
Cube
1800 2000
15 16.7
Up to 188 Up to 214
3000 4500
58 68
3/4 3/4
40
12 x 14.5 x 5.7
Pure Sine < 5% THD
-40°C to 65°C (-40°F to 149°F)
Battery Charger
Up to 13.5 Up to 17.0
Up to 95 Up to 120
200 300
500 600
Table 1 Specifications
12NP Manual
12NP24
2400
20
Up to 269
5500
74
1
120 +/- 3%
60 +/- .05%
10.5–16
12.6
Up to 88%
Up to 160,000µF
95–135
120
Up to 17.7
Up to 130
300
700
30
12NP30
Large
3000
25
Up to 315
8000
80
2
68
13.8 x 17.1 x 8
Up to 23.0
Up to 150
300
800