Specifications - Sensata Dimensions 24NP36 Owner's Manual

Specifications

WARNING: The inverter is intended to recharge batteries. The battery that is connected to this product is
only suitable if it complies with the given battery standard for that battery type and is provided with a battery
management system that will monitor and control the electrical and thermal health of the battery during
charging. When installing this inverter, the battery is to be verified as in compliance with the applicable battery
standard.
All ratings assume 25.2 VDC nominal voltage, 25°C ambient temperature, and that the inverter is mounted in free
air. Specifications are subject to change without notice.
Inverter
Enclosure Type
Output Power (Watts Cont.)
Output Current (Amps AC Cont.)
Input Current (Amps DC Cont.)
Peak Power (Watts)
Peak Output (Amps AC)
Motor Starting Rating (HP)
Weight (lbs.)
Dimensions in. (L x W x H)
Output Voltage (VAC)
Output Frequency
Output Waveform
Input Voltage (VDC)
Nominal Input Voltage (VDC)
Operating Temperature
Peak Efficiency
DC Input Capacitance
Minimum Req'd Battery A-Hr*
Max A-Hr**
AC Input Voltage Range (VAC)
Nominal Input Voltage (VAC)
Input Current (AAC)
Output (ADC)
Bypass (AAC)
* For optimal charging, the inverter amp hour setting should match the amp hour rating of the connected battery.
** Each inverter amp-hr setting can be adjusted with the optional LCD or with RV-C CAN.
Page 6
Pure Sine < 5% THD
-20°C to 65°C (0°F to 149°F)
Up to 160,000µF
Battery Charger
Table 1 Specifications
24NP Manual
24NP36
Large
3600
30
Up to 167
8000
100
2
68
13.8 x 17.1 x 8
120 +/- 3%
60 +/- .05%
21–34
25.2
Up to 88%
50
500
95 –135
120
Up to 25
Up to 90
30