Sensata dimensions 12NP18 Owner's Manual page 20

External Power Mode Continued
Battery Charger Continued
Battery Type
Current Limit
Phase Terminates
Phase Timeout
Accept charge voltage
@ 77°F/25°C
Accept voltage temp compensated
Maximum accept charge at low
temps
Phase Terminates
Phase Timeout
Float voltage @77°F/25°C
Float voltage temp comp
Condition voltage @77°F/25°C
Condition voltage temp
compensation
Condition duration
Condition frequency
Page 20
AGM
Bulk Charge Phase
1. When battery voltage reaches the accept voltage
2. When the bulk charge timeout is reached
Bulk charge timers will extend when load management
reduces charger current below 50% (25 A)
Accept Charge Phase
14.3 VDC
15.0 VDC @ 4 °C
1. When charge current is reduced.
2. When the accept timeout is reached.
3. If the charger can't maintain the accept voltage
6 hours (may be configured through CAN or LCD)
Float Charge Phase
13.4 VDC
Condition (Equalization) Phase
N/A
N/A
N/A
N/A
Table 4 Battery Charger Recipes with BTS
12NP Manual
Gel
SEE SPEC
6 Hours
13.7 VDC 14.6 VDC
5mv/cell/°C
14.5 VDC @ 15.0 VDC
-6°C @ 10°C
13.4 VDC 13.2 VDC
5mv/cell/°C
N/A 15.5 VDC
30.24 mV/
N/A
N/A 4 hours
N/A
Control
Wet LFP
14.4 VDC
N/A
0.5 hours
13.6 VDC
N/A
N/A
cell/°C
N/A
Manual
N/A