Performing A Memory Upgrade; Table 7-1. Sample Dimm Configurations - Dell 2200 User Manual

Total Memory
32 MB
64 MB
96 MB
128 MB
128 MB
192 MB
256 MB
288 MB
384 MB
416 MB
512 MB

Performing a Memory Upgrade

Use the following procedure to perform a memory
upgrade:
1. Remove the computer cover according to the
instructions in "Removing the Computer Cover"
in Chapter 6.
CAUTION: See "Protecting Against Electro-
static Discharge" in the safety instructions at
the front of this guide.
2. Remove the system board assembly according to
the instructions in "Removing the System Board
Assembly" in Chapter 6.
Lay the system board assembly on a flat work sur-
face so you can easily access the DIMM sockets.
3. Determine the DIMM sockets into which you will
install or replace DIMMs.
See the previous subsection, "DIMM Installation
Guidelines."
7-6 Dell PowerEdge 2200 Systems User's Guide

Table 7-1. Sample DIMM Configurations

DIMM_A
32 MB
32 MB
32 MB
32 MB
128 MB
128 MB
128 MB
128 MB
128 MB
128 MB
128 MB
DIMM Socket
DIMM_B DIMM_C
None
32 MB
32 MB
32 MB
None
32 MB
128 MB
128 MB
128 MB
128 MB
128 MB
4. Install or replace the DIMMs as necessary to
reach the desired memory total.
Follow the instructions in "Installing a DIMM" or
"Removing a DIMM," as appropriate, later in this
section.
5. Replace the system board according to the
instructions in "Replacing the System Board
Assembly" in Chapter 6.
6. Replace the computer cover according to the
instructions in "Replacing the Computer Cover"
in Chapter 6, reconnect your computer and
peripherals to their power sources, and turn them
on.
After the computer completes the power-on self-test
(POST) routine, it runs a memory test that displays
the new memory total, which includes all newly
installed memory.
DIMM_D
None
None
32 MB
32 MB
None
32 MB
None
32 MB
128 MB
128 MB
128 MB
None
None
None
32 MB
None
None
None
None
None
32 MB
128 MB