Entering The System Setup Program; Figure 4-1. Main Menu Of The System Setup Program - Dell 2200 User Manual

E
ntering the System Setup Pro-
gram
You can enter the System Setup program by pressing the
<F2> key when prompted while the computer is starting
up.
If you wait too long, your operating system begins to load
into memory. In this case, let the system complete the load
operation; then restart the system and try again.
configuration options and system data
Dell System PowerEdge 2200 Setup
Main Advanced
Time:
Date:
Diskette Drive A:
Diskette Drive B:
Fast Video BIOS:
Memory Cache:
Boot Sequence:
Num Lock:
Speaker:
Processor 1:
Processor 2:
Level 2 Cache:
Base Memory:
Extended Memory:
Video Memory:
Service Tag:
Asset Tag:
F1 Help
ESC Exit
key functions

Figure 4-1. Main Menu of the System Setup Program

Security Exit
[5:01:16]
[June 04, 1997]
[1.44 MB, 3.5 inch]
[Not Installed]
[On and Cached]
[Enabled]
[A: then C:]
[On]
[On]
Pentium II 266
Pentium II 266
512 KB
640 KB
31 MB
1 MB
AB12Z
123456789A
Select Item -/+
Select Menu Enter
NOTE: To ensure an orderly system shutdown, consult
the documentation that accompanied your operating
system.
You can also enter the System Setup program by
responding to certain error messages. (See "Responding
to Error Messages" at the end of this chapter.)
The following sections describe the System Setup cate-
gories in the Main (see Figure 4-1), Advanced, Security,
and Exit menus.
Change Values
Select Submenu
Using the System Setup Program
title box
BIOS Version A XX
Item-Specific Help
Resets the time on the
computer's internal
clock. Time in kept in a
24-hour format. Pressing
<Tab>, <Shift-Tab>, or
<Enter> selects fields
F9 Setup Defaults
F10 Previous Values
help
4-3