Set Configuration - Dell PowerVault 130T User Manual

Code Vers: x.x.xx
Cell Limit = 18 (30)
SCSI ID = x
x Drives Installed
Fast Load - ON (OFF)
Auto Clean - ON (OFF)
Cart Magazine - YES (NO)
SCSI Emula - Norml
Drv 3 NOT Instald
Drv 2 NOT Instald
Drv 1 NOT Instald
Drv 0 SCSI ID - x

Set Configuration

Set Configuration displays library and drive configuration options.
>
Set Date and Time
Set Cell Limit
Set Library SCSI ID
Set Drive Count
Set Drive SCSI ID
Set Fast Load
Set Auto Clean
Set Cart Magazine
Set SCSI Emulation
Option
Set Date and Time
Set Cell Limit
Set Library SCSI ID
Set Drive Count
Set Drive SCSI ID
The operator panel displays only
four lines. Use the arrow keys to
scroll through the options.
The operator panel displays only
four lines. Use the arrow keys to
scroll through the options.
Description
Sets the day, date, and time.
Sets the cell limits (30).
Sets the SCSI ID for the library.
Enters the number of installed DLT drives.
Sets the SCSI IDs for the tape drives. A sub-menu allows
you to set drives "on-lib bus" (the same SCSI bus as the
library) or "off-lib bus" (a different bus).
The on-lib bus or off-lib bus setting applies to the status of a
tape drive inside the Dell PowerVault 130T . A tape on the
library bus (on lib bus) shares the same SCSI chain as the
library port. A tape drive off the library bus (off-lib bus) does
not reside on the SCSI chain of the library port. This option is
presented when a user sets the SCSI ID of a tape drive
inside the library. This choice follows the selection of a
drive's SCSI ID. Refer to Figure 3-4.
Operating the PowerVault 130T 3-9