Dell PowerVault 130T User Manual page 57

Storage Cell Locations
Item Parts Description
Number
1 Drive Slot 3
2 Drive Slot 2
3 Drive Slot 1
4 Drive Slot 0
5 NOTE: If a drive is not installed in slot 3,
two additional storage cells must be
installed there.
6 Removable Cartridge Magazine
7 Cleaning Cartridge Cell if auto clean
enabled
8 Array Target
9 (XX) - Cartridge Count
10 Cartridge Access Port (CAP)
In this figure, the number in parentheses equals the total cartridge count. The other
number is the storage cell number in one of the three columns. The storage cell layout as a
whole is called the "array." The "array targets" are used for robotic calibration during
initialization.
Operating the PowerVault 130T 3-21