Dell™ PowerVault™ 136T LTO Tape Library Requirements for LTO-2/LTO-3 Mixed Mode Configurations LTO-2/LTO-3 混合模式 配置要求 Configuration requise pour les bibliothèques comprenant des lecteurs LTO-2 et LTO-3 Anforderungen für gemischte LTO-2/LTO-3 Konfigurationen LTO-2/LTO-3 のミックスモード構成の要件 LTO-2/LTO-3 혼합 모드 구성 요구 사항 Requisitos para configuraciones de modo mixto LTO-2/LTO-3 w w w .
Page 3
Dell™ PowerVault™ 136T LTO Tape Library Requirements for LTO-2/LTO-3 Mixed Mode Configurations w w w . d e l l . c o m | s u p p o r t . d e l l . c o m...
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
Page 5
Overview This document provides requirements for operating a mix of LTO-2 and LTO-3 drives in the Dell™ PowerVault™ 136T LTO tape library. The following requirements must be met in order to operate a mixed mode library: • LTO-2 and LTO-3 drive modules are installed in the library.
SNC User's Guide, and the SNC Manager User's Guide from the Dell Support website at support.dell.com. Download the latest firmware package and instructions for the PV136T from the Dell Support website at support.dell.com. NOTICE: Before performing the firmware update procedure, carefully read and follow the firmware update instructions included with the firmware update package.
Page 7
Labels ending in "L2" to LTO-2 media. • Labels ending in "L3" to LTO-3 media. • Labels ending in "LT" to LTO-3 WORM media. Figure 1-1. Sample LTO Bar Code Label for WORM Media Dell PowerVault 136T LTO Tape Library...
Page 8
Backup, does not support mixing of LTO-2 and LTO-3 drives. It is also recommended that you do not use native Linux utilities, such as Tar, due to the lack of media management capabilities. Dell highly recommends using qualified third party backup software for media and job management.
Your library firmware versions do not match. Download the latest version to the library. This is normal if the library or drive firmware is outdated. Access the Dell Support website at support.dell.com and update library or drive firmware to the latest version. •...
Page 14
注: • • An incorrect library configuration is detected. • Your library firmware versions do not match. Download the latest version to the library. Dell PowerVault 136T LTO 54K1 4.25.04 4.60.03 (RMU) Ethernet SNC User's Guide SNC SNC Manager SNC...
Page 15
You may wish to update these drives. See User's Guide. 介质条形码标签 PV136T LTO-3 • • • • 图 1-1. WORM 介质的 LTO 条形码标签示例 启用扩展条形码读取功能 PV136T → Setup menu LTO-1 LTO-2 LTO-3 LTO-3 WORM → Library Dell PowerVault 136T LTO LTO-2 Main → Media...
Page 16
Main menu Library Media Change • Default • Extended 注: 配置备份软件 注: 注: Windows® Removable Storage Manager (RSM) Linux Dell Dell PowerVault 136T LTO Setup LTO-3 LTO-2 LTO-2 LTO-3 Native Backup...
Page 18
• Your library firmware versions do not match. Download the latest version to the library. Dell • One or more drives have downlevel firmware. You may wish to update these drives. See User's Guide. Dell PowerVault 136T LTO support.dell.com...
Bibliothèque de bandes LTO PowerVault™ 136T Dell™ Configuration requise pour les bibliothèques comprenant des lecteurs LTO-2 et LTO-3 w w w . d e l l . c o m | s u p p o r t . d e l l . c o m...
Page 20
écrite de Dell Inc. est strictement interdite. Marques utilisées dans ce document : Dell, le logo DELL et PowerVault sont des marques de Dell Inc. ; Microsoft et Windows sont des marques déposées de Microsoft Corporation. Tous les autres noms de marques et marques commerciales utilisés dans ce document se rapportent aux sociétés propriétaires des marques et des noms...
LTO-2 et LTO-3 Si vous installez des lecteurs LTO-3 (initialement ou pour une mise à niveau), reportez-vous au manuel Dell PowerVault 136T User's Guide (Dell PowerVault 136T - Guide d'utilisation) ou au document Mise à niveau vers des modules de lecteurs de bande LTO-3. Vous pouvez télécharger ces documents à...
Page 22
à distance (RMU) ou le panneau de contrôle de l'opérateur (OCP) de la bibliothèque. Pour plus d'informations, reportez-vous au guide d'utilisation de la bibliothèque de bandes PowerVault 136T. Le nivreau de micro-code du SNC peut être affiché via le logiciel SNC Manager, le port série SNC, ou au moyen d'une connexion Telnet avec...
Page 23
éviter ces situations. Étiquettes de codes barres des médias Pour que le PowerVault 136T puisse reconnaître et exploiter correctement des médias LTO-2 et LTO-3 dans une même bibliothèque, des étiquettes de codes barres correctes doivent être apposées sur tous les médias.
Page 24
étendus (5 à 13 caractères). Vous pouvez accéder au paramètre correspondant aux codes barres étendus à partir du panneau de contrôle du PowerVault 136T : Main menu → Setup → Library → Media (Menu principal → Configuration → Bibliothèque → Médias).
LTO-2 et LTO-3. En outre, il est déconseillé d'utiliser les utilitaires natifs de Linux (Tar, par exemple), car leurs capacités de gestion des médias sont très limitées. Dell recommande vivement d'utiliser uniquement des logiciels de sauvegarde tiers spécialisés pour la gestion des médias et des travaux.
Page 26
Cette situation est normale si le micro-code de la bibliothèque ou du lecteur n'est pas à jour. Accédez au site support.dell.com et installez la version la plus récente du micro-code de la bibliothèque ou du lecteur.
Page 27
Dell™ PowerVault™ 136T LTO- Bandbibliothek Anforderungen für gemischte LTO-2/LTO-3 Konfigurationen w w w . d e l l . c o m | s u p p o r t . d e l l . c o m...
Page 29
Installation von LTO-2- und LTO-3-Laufwerkmodulen Wenn Sie LTO-3-Laufwerke installieren oder einen entsprechenden Upgrade durchführen, lesen Sie die Dokumente Dell PowerVault 136T User's Guide (Dell PowerVault 136T – Benutzerhandbuch ) oder Upgrading the LTO 1 or LTO-2 Tape Drive Modules to LTO-3 Tape Drive Modules (Upgrade von LTO-1- oder LTO-2-Bandlaufwerkmodulen auf LTO-3-Bandlaufwerkmodule).
Page 30
Dell Support-Website unter support.dell.com zum Herunterladen bereit. Laden Sie das aktuelle Firmwarepaket und die Anweisungen für das Modell PV136T von der Dell Support-Website unter support.dell.com herunter. HINWEIS: Bevor Sie die Firmware aktualisieren, lesen und befolgen Sie sorgfältig die entsprechenden Anweisungen im Firmwarepaket.
Page 31
Etiketten mit „L1“ am Ende für LTO-1-Medien • Etiketten mit „L2“ am Ende für LTO-2-Medien • Etiketten mit „L3“ am Ende für LTO-3-Medien • Etiketten mit „LT“ am Ende für LTO-3 WORM-Medien Abbildung 1-1. Beispiel für LTO-Strichcode-Etikett für WORM-Medium Dell PowerVault 136T LTO-Bandbibliothek...
Page 32
Extended (Erweitert) – Die Bibliothek erkennt Strichcode- Etiketten mit 5 bis 13 Zeichen. ANMERKUNG: Ihre Datensicherungssoftware für die Verwaltung von Medien mit Strichcode-Etiketten einrichten wollen. 5 Klicken Sie auf OK. Dell PowerVault 136T LTO-Bandbibliothek Verwenden Sie die erweiterte Länge, wenn Sie...
Native Backup, unterstützt keinen gemischten Betrieb von LTO-2- und LTO-3-Laufwerken. Auch die Verwendung von nativen Linux-Dienst- programmen wie Tar wird nicht empfohlen, da keine Medienverwaltungs- funktionen vorhanden sind. Dell empfiehlt für die Medien- und Jobverwaltung nachdrücklich spezielle Datensicherungssoftware von Fremdanbietern. Fehlerbehebung •...
Page 34
Your library firmware versions do not match. Download the latest version to the library. Dies ist normal, wenn die Bibliotheks- oder Laufwerk-Firmware überholt ist. Rufen Sie die Dell Support-Website unter support.dell.com auf und aktualisieren Sie die Bibliotheks- oder Laufwerk-Firmware auf die aktuelle Version.
Page 35
Dell™ PowerVault™ 136T LTO テープライブラリ LTO-2/LTO-3 のミックスモー ド構成の要件 w w w . d e l l . c o m | s u p p o r t . d e l l . c o m...
Page 39
Download the latest version to the library • One or more drives have downlevel firmware. You may wish to update these drives. See User's Guide. PV136T • • • • LTO-3 SAC 42 LTO-2 LTO-1 LTO-2 LTO-3 LTO-3 WORM Dell PowerVault 136T LTO LTO-3...
Page 40
図 1-1 WORM メディア用 LTO バーコードラベルの例 Setup Main menu Library Media Change • Default(デフォルト)― ライブラリは 6 文字のバーコードラベル を読み取ります。 • Extended(拡張)― ライブラリは 5 ~ 13 文字のバーコードラベル を読み取ります。 メモ: Dell PowerVault 136T LTO PV136T Main menu Library Setup Media...
Page 42
Your library firmware versions do not match. Download the latest version to the library • One or more drives have downlevel firmware. You may wish to update these drives. See User's Guide. 1 Dell PowerVault 136T LTO LTO-3 SAC 42 support.dell.com 193D.00002 3.33...
Page 43
Dell™ PowerVault™ 136T LTO 테 이프 라이브러리 LT0-2/LT0-3 혼합 모드 구성 요구 사항 w w w . d e l l . c o m | s u p p o r t . d e l l . c o m...
Page 45
개요 이 문서에서는 Dell™ PowerVault™ 136T LTO 테이프 라이브러리에서 LTO-2 및 LTO-3 드라이브를 함께 작동하기 위한 요구 사항을 제공합니다. 혼합 모드 라이브러리를 작동하려면 다음 요구 사항을 충족해야 합니다. • LTO-2 LTO-3 • • • • LTO-2 및 LTO-3 드라이브 모듈 설치...
Page 46
PV136T 사용 설명서 . SNC 사용 설명서 Dell 주의사항: 참고: • LTO-2 • An incorrect library configuration is detected. Dell PowerVault 136T LTO : 53Y3 : 54K1 (OCP) SNC 사용 설명서 , SNC 사용 설명서 (support.dell.com) (support.dell.com) LTO-3 SAC 42 (RMU) SNC 관리자...
Page 47
See User's Guide. 미디어 바코드 레이블 PV136T • "L1" • "L2" • "L3" • "LT" 그림 1-1. WORM 미디어용 단순 LTO 바코드 레이블 LTO-2 LTO-1 LTO-2 LTO-3 LTO-3 WORM Dell PowerVault 136T LTO LTO-3...
Page 48
판독합니다 . 참고: OK ( 백업 소프트웨어 구성 LTO-3 참고: 참고: Native Backup ( Storage Manager (RSM) Dell PowerVault 136T LTO (5 ~ 13 ) : Main menu ( Setup ( LTO-2 LTO-2 LTO-3 ) → Setup ( ) →...
Page 49
" – RMU에서 LTO-2 또는 LTO-3 드라이브를 인식하지 못하는 경우: • . RMU 라이브러리에 다음과 같은 SAC 42 오류가 표시되는 경우: • An incorrect library configuration is detected. LTO-2 " " 193D.00002 3.33 Dell PowerVault 136T LTO LTO-2 '!7' 3.35...
Page 50
Your library firmware versions do not match. Download the latest version to the library. . Dell • 라이브러리에 다음 오류가 표시되는 경우: One or more drives have downlevel firmware. You may wish to update these drives. See User's Guide. Dell PowerVault 136T LTO (support.dell.com)
Page 51
Biblioteca de cintas Dell™ PowerVault™ 136T LTO Requisitos para configuraciones de modo mixto LTO-2/LTO-3 w w w . d e l l . c o m | s u p p o r t . d e l l . c o m...
Page 52
Microsoft Corporation. Otras marcas y otros nombres comerciales pueden utilizarse en este documento para hacer referencia a las entidades que los poseen o a sus productos. Dell Inc. renuncia a cualquier interés sobre la propiedad de marcas y nombres comerciales que no sean los suyos.
Información general En este documento se indican los requisitos para utilizar una combinación de unidades LTO-2 y LTO-3 en la biblioteca de cintas Dell™ PowerVault™ 136T LTO. Para utilizar una biblioteca en modo mixto deben cumplirse los requisitos siguientes: •...
Page 54
SNC Manager, la guía del usuario de la SNC y la guía del usuario de SNC Manager desde la página Web de asistencia de Dell (support.dell.com). Descargue el paquete de firmware más reciente e instrucciones para la unidad PV136T desde la página Web de asistencia de Dell (support.dell.com). AVISO: antes de llevar a cabo el procedimiento de actualización de firmware,...
Page 55
Las etiquetas con la terminación “L3” son para los soportes LTO-3. • Las etiquetas con la terminación “LT” son para los soportes LTO-3 WORM. Figura 1-1. Ejemplo de etiqueta de código de barras LTO para soporte WORM Biblioteca de cintas Dell PowerVault 136T LTO...
Page 56
5 y 13 caracteres. NOTA: utilice la longitud ampliada si va a configurar software de copia de seguridad para que administre los soportes, empleando las etiquetas de código de barras. 5 Seleccione OK (Aceptar). Biblioteca de cintas Dell PowerVault 136T LTO...
Native Backup, no admite la combinación de unidades LTO-2 y LTO-3. También se recomienda no utilizar utilidades nativas de Linux, como Tar, ya que éstas carecen de funciones de administración de soportes. Dell recomienda utilizar software de copia de seguridad de terceros para la administración de los soportes y de los trabajos.
Page 58
Download the latest version to the library. Es normal si el firmware de la biblioteca o de la unidad está obsoleto. Acceda a la página Web de asistencia de Dell (support.dell.com) y actualice el firmware de la biblioteca o de la unidad a la versión más reciente.