>
Clean a Drive
Change Clean Cart
Enter Clean Limit
Change SCSI ID
Uncal Drive Target
2.
The library prompts you to specify the drive number and insert a cleaning cartridge
through the Cartridge Access Port (CAP).
3.
The robot then mounts the cleaning cartridge to the specified drive, and the drive uses
it to clean its read/write heads.
4.
After the cleaning is finished, the robot returns the cartridge to the Cartridge Access
Port (CAP), and you can remove it.
Moving the Hand/Camera Assembly Manually
If the library robot fails to operate and you want to mount a tape into a drive, the hand/
camera assembly might be in the way of the cartridge tape you want to reach, whether
that tape is in a DLT drive or a storage cell.
Figure 3-7. Moving the Hand/Camera Assembly
3-16
User's Guide
The operator panel displays only
four lines. Use the arrow keys to
scroll through the options.