Completing The Installation Of The Library; Powervault 130T Rear View Showing Power Switch; Powervault 130T Power Switch - Dell PowerVault 130T User Manual

Figure 2-7. PowerVault 130T Rear View Showing Power Switch

PowerVault 130T Power Switch

Item
Number
1
Power Switch
When the PowerVault 130T is powered on or reset, it performs a complete diagnostic
routine and a tape audit. If the front door is opened and closed while power is on, the
library performs the same routines (except realigning to the cells). During these operations,
the library displays its current activity on the operator panel display.
CAUTION: As part of the startup/reboot routine, the display briefly shows
software version numbers and the message "MENU available." Do not press
MENU at this time. The functions available here are for use by qualified service
personnel only. The routine will automatically continue in a few seconds.
After the library completes its startup routine, the operator panel status display shows
current library and drive status information. To go to the Main Menu, press the MENU
button.

Completing the Installation of the Library

Write the serial number on the front of the cover of the User's Guide.
2-14 User's Guide
Parts Description
PowerVault 130T Power Switch