4
Operation
Removing the Rotor
Removing the Rotor
To remove the rotor, proceed as follows:
1. Open the centrifuge lid.
2. Grab the rotor handle with both hands and press against the green Auto-Lock
same
time, pull the rotor directly upwards with both hands and remove it from the centrifuge spindle.
Make sure not to tilt the rotor while doing this.
Aerosol-tight Rotors
When using an aerosol tight lid the rotor can only be removed with the lid closed. This is to protect
you and the samples.
Figure 4-2. Auto-Lock
4-12 Sorvall Legend XF / XFR
CAUTION
Rotors supplied with a lid for aerosol-tight applications come with a mandrel, which
TM
belongs to the Auto-Lock
beingdamaged.
TM
-lid for aerosol-tight rotors
WARNING Mind the Auto-Lock mandrel inside the lid. Do not touch the mandrel.
. Be sure not to place the lid onto this mandrel to prevent it from
TM
TM
key. At the
Thermo Scientific