Keys - Thermo Scientific Sorvall Legend XF Instruction Manual

3
Control Panel
Control Panel
Control Panel
The control panel contains the keys and displays of the centrifuge (only the power switch is located
on the back of the device). All parameters can be selected and changed during operation.
Program selection keys
Braking and Acceleration Key

Keys

The keys allow user intervention for controlling the operating mode as follows:
Key
3-2 Sorvall Legend XF / XFR
SPEED
Directory Key
Changing the display
Speed / RCF Value
Changing the display mode
Run time / Remaining run time
Start
Stop
Open lid
Pulse
Directory
Bucket
Braking and
Acceleration Curves
Changing the display
mode
Display
TIME
TEMP
Numeric pad
Bucket
Changing the display mode chamber / sample temperature
Display contents
Normal start of the centrifuge
End run manually
Automatic release (possible only when device is switched on).
Emergency release (see "Mechanical Emergency Door Release"
page 7-2)
By pressing the key PULSE
accelerates up to the end speed. Releasing the key initiates a stopping
process at the highest braking curves.
Use the directory key in order to modify the displayed value
Use the bucket key in order to have all available bucket types
displayed in succession.
Use the ACC DEC key
curves.
Use the Toggle key to change the display mode. (speed / RCF
value, sample / chamber temperature, run time counter from start or
preset speed on)
ENTER
the centrifuge starts immediately and
to toggle between braking and acceleration
PULSE
OPEN
START
STOP
on
Thermo Scientific