Thermo Scientific Sorvall Legend XF Instruction Manual page 28

4
Operation
Entering Parameters
5. Press the START key
The rotor chamber is cooled down or heated up to the preset temperature.
6. Press the STOP key
The display shows the current temperature.
Bucket selection
Bucket selection is only possible for swing-out rotors.
The bucket code corresponds to the last four digits of the bucket catalog number.
1. Press the BUCKET key
The display shows the following message:
2. Press the BUCKET key
Your entry will be automatically confirmed if you do not press any key for 5 seconds.
Bucket radius
Having entered the bucket code, you may want to specify the radius.
When you use adaptors, you will have to specify the radius. For appropriate values please refer to the
instruction manual for the rotor.
1. Press ENTER
4-8 Sorvall Legend XF / XFR
.
.
.
repeatedly until the bucket being used is displayed.
to confirm your selection and open the radius input menu.
Thermo Scientific