Controll Panel; Keys - Thermo Scientific RC 12BP Plus Instruction Manual

3
Control Panel

CONTROLL PANEL

CONTROLL PANEL
The controll panel consists of the RUN DISPLAY, the SET DISPLAY, the MENU key with the
OPTION INDICATORS, the PRIMARY FUNCTION KEYS, a NUMMERIC KEY PAD, and a
KEYPAD LOCK.
OPTION INDICATORS
KEYPAD LOCK
MENU KEY
SET DISPLAY

KEYS

Press the START key to start a run.
Press the STOP key to stop a run.
Press the OPEN key to open the door. The key can only be used under the following conditions: The
centrifuge is switched on. The rotor is not spinning. The is now error message in the display. The
message OPEN appears in the RUN DISPLAY.
Press the ENTER key to confirm a selection. Or to step though the menu.
Use the nummeric keypad to enter values into the SET DISPLAY. CLEAR removes input values or
messages from the SET DISPLAY. */- toggles between positive and negative temperature values.
Press the ROTOR key to enter the rotor selection.
Press the SPEED key to enter the speed or RCF selection.
Press HOLD key to select an continues run.
Press TIME key to enter the time selection.
Press ACE key to enter ACE value.
Press TEMP key to enter the temperature.
3-2 RC 12BP+
PRIMARY FUNCTION KEYS
RUN DISPLAY
NUMERIC KEYPAD
Thermo Scientific