One Robotic Lawnmower For Several Working Areas; Even Mowing Results In Complex Working Areas - Husqvarna Automower 320 Technical Manual

• The first time a new robotic lawnmower leaves the
charging station, for instance in the start-up sequence.
• In the Settings - Guide calibration function.
• The first time after switching Corridor width for any
guide wire.
• The first time after Reset all user settings.
• The first time after programming the main circuit
boards.
3.6 One robotic lawnmower for several
working areas
The unique coupling between mower and charging station is
saved in the profiles. This allows up to three different charging
stations to be coupled to the same robotic lawnmower.
• Coupling a new charging station to the robotic lawnmower:
• First save a profile to be used with the original charging
station.
• Then place the mower in the new charging station being
coupled to the mower.
• Select Security-New loop signal.
• Save a profile for the new charging station.
In order to use the robotic lawnmower in the original charging
station, the first profile must now be selected. In order to use
the robotic lawnmower in the new charging station, the new
profile must now be selected. To give the best function, GPS
assisted navigation should be disabled for all extra installations
and only be used for the main installation.
3.7 Even mowing results in complex
working areas
The robotic lawnmower is equipped with setting options to
ensure consistent mowing results even in complex working
areas Settings are carried out in Lawn coverage. If these
settings are not changed, the area near the charging station
will be cut more than areas further away from it or beyond
narrow passages. See 3.10 Installation examples on
page 39 for setting examples.
3.7.1 GPS assisted navigation
This section does not apply to the Automower
GPS assisted navigation uses an inbuilt GPS to check which
areas are mowed and thereby which areas need to be mowed
next. After a number of days operating, the robotic lawnmower
creates a map of the working area and where the guide wires
are laid. In this way the Automower
set distance and proportion for hard to reach parts of the
working area.
English - 36
3. INSTALLATION
320.
®
330X can automatically
®