Husqvarna Automower 320 Technical Manual page 62

Hide thumbs Also See for Automower 320:

Table of Contents

5. REPAIR INSTRUCTIONS

Alternative 1 - Clockwise

Start by laying one end of the sealing strip in line with the

marking on the chassis.

Continue laying the sealing strip clockwise around the

chassis half.

Lay the other end of the sealing strip above the first end

and then out of the channel. Fasten with retainer on the

bottom.

Alternative 2 - Counter-clockwise

Start by laying one end of the sealing strip in line with the

marking on the chassis.

Continue laying the sealing strip counter-clockwise around

the chassis half.

Lay the other end of the sealing strip above the first end

and then out of the channel. Fasten with retainer on the

bottom.

Note that one end of the sealing strip must lie outside the

channel on the 320/330X, unlike other models where both

ends must lie outside the channel.

English - 60

Table of Contents

Show Quick Links

Table of Contents

Automower 330x