Husqvarna Automower 320 Technical Manual page 26

• Current: Nominal power consumption,
measured in mA.
The Info - GPS navigation menu shows:
• Satellites: The number of satellites the GPS
receiver is currently in contact with.
• Position: The mower's position measured
in longitude and latitude.
2.6.2 History, total
You can use the values shown in this sub-menu
to determine how well the mower has been working.
When a value deviates from the norm, this may be due
to an installation defect or a fault in the mower.
The sub-menu consists of four part-menus that
together provide a good picture of the mower's
function.
Key data
The Key data sub-menu shows:
• Total running
Running time is defined as the accumulated
time in hours that the wheel motors have
been working. This means the time when the
robotic lawnmower is running without mowing
is also included in the running time. The time
stated here is the time stated on the start page.
•
Total mowing
Mowing time is defined as the accumulated
time in hours that the blade motor has been
working.
• Total search time
Search time is defined as the accumulated
time in hours that the mower has been in
search mode, in other words the time from
starting to search for the charging station until
it has docked. The time for searching varies
depending on how large the working area is
and what the installation is like. You should
aim at as low a value for searching as possible
Depending on the installation it is normal that
the mower searches for between 10 - 20%
of the total running time.
• Total charging time
Charging time is defined as the accumulated
time in hours that it has taken to charge the
battery.
English - 24
2. SPECIAL MENU FUNCTIONS
Info
History, total
History, trip
Test
Special settings
Key data
Search times
Mow times
Battery capacity