Otto Bock 1E56 Axtion Instructions For Use Manual page 11

Größe [cm]
Mobilitäts­
grad
1 Product description
INFORMATION
Date of last update: 2020-07-07
► Please read this document carefully before using the product and
observe the safety notices.
► Instruct the user in the safe use of the product.
► Please contact the manufacturer if you have questions about the
product or in case of problems.
► Report each serious incident in connection with the product, in particu­
lar a worsening of the state of health, to the manufacturer and to the
relevant authority in your country.
► Please keep this document for your records.
1.1 Construction and Function
The 1E56 Axtion prosthetic foot is suitable for walking on various surfaces
and for a wide range of speeds.
The special combination of carbon and polyurethane absorbs heel strike.
The prosthetic foot permits perceptible plantar flexion at heel strike and a
natural rollover movement. Stored energy is released by the spring ele­
ments.
1.2 Combination possibilities
This prosthetic component is compatible with Ottobock's system of modular
connectors. Functionality with components of other manufacturers that have
compatible modular connectors has not been tested.
2 Intended use
2.1 Indications for use
The product is intended exclusively for lower limb exoprosthetic fittings.
2.2 Area of application
Our components perform optimally when paired with appropriate compon­
ents based upon weight and mobility grades identifiable by our MOBIS clas­
sification information and which have appropriate modular connectors.
22 23 24 25 26 27
3 und 4
28 29 30 31
English
11