Voice Call Alert; Remote Start Code - BT PaperJet 35 User Manual

Voice call alert

If your BT PaperJet 35 is set to PHONE/FAX reception, it will
automatically alert you to voice calls with a 20 second tone. You can
change the duration of the tone, from 15 to 40 seconds.
1. Press repeatedly until the display shows INSTALLATION .
2. Press repeatedly until the display shows FAX/TEL TIMER:20 .
3. Press or to scroll through the options: 15 , 20 , 30 or 40 .
4. Press to confirm the option displayed.
5. Press to return to standby.

Remote start code

If you answer a call on an extension phone, before BT PaperJet 35 has
automatically answered, and then find it is a fax call, you can transfer the
call to the BT PaperJet 35 by pressing
You can change the 5 to another number 0-9 or ✱ if required. You can
also switch remote start off.
1. Press repeatedly until the display shows INSTALLATION then
press to display TEL. LINE SET-UP .
2. Press again. The display shows PUBL.LINE(PSTN ).
3. Press repeatedly until the display shows REMOTE START:ON .
4. To switch the code off, press
confirm.
Or
To change the code press
current code.
5. Enter the new code -
BT PaperJet 35 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672
on the keypad of your phone.
or to scroll to OFF and press
. The display shows TYPE CODE above the
or .
Additional settings
If connected to a switchboard, see page 72.
to
51