Resend, Change Number Or Cancel A Stored Fax - BT PaperJet 35 User Manual

2. Press repeatedly until the display shows TX FROM MEMORY then
press . The document is scanned.
3. When scanning is completed the document is assigned a reference
number, e.g. DOC.N.XXXX and the display shows TYPE TIME HH:MM .
4. Enter the time you want the fax to be sent, e.g.
5. Press to confirm. Display shows TYPE NUMBER NUM/TOUCH/SPEED .
6. Enter the number or use the one-touch or speed dial directories.
7. Press .
You can now enter another number to send the same document to
another person.
Or
Press again to confirm. The display shows AUTOMATIC MEMORY TX .

Resend, change number or cancel a stored fax

1. Press repeatedly until the display shows TX FROM MEMORY then
press . Display shows ALREADY ENTERED .
2. Press display shows PRINT SETTING?
3. Press or to switch between the options:
PRINT SETTING? – press
fax stored in the memory. After printing, the fax
returns to standby.
CANCEL SETTING? – press
to standby.
CHANGE PARAM? – press
be sent.
4. Press to confirm. Display shows TYPE NUMBER .
5. Enter the number or use the one-touch or speed dial directories.
BT PaperJet 35 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672
. for 6.20pm.
to print a status report of the last
to cancel the document and return
to change the time the fax will
If the power fails, the document stored in
the memory will be cancelled.
Faxing 19