Table of Contents
Advertisement
Voice call alert
If your BT PaperJet 35 is set to PHONE/FAX reception, it will
automatically alert you to voice calls with a 20 second tone. You can
change the duration of the tone, from 15 to 40 seconds.
repeatedly until the display shows INSTALLATION .
1. Press
repeatedly until the display shows FAX/TEL TIMER:20 .
2. Press
to scroll through the options: 15 , 20 , 30 or 40 .
3. Press
or
4. Press
to confirm the option displayed.
5. Press
to return to standby.
Remote start code
If you answer a call on an extension phone, before BT PaperJet 35 has
automatically answered, and then find it is a fax call, you can transfer the
call to the BT PaperJet 35 by pressing
You can change the 5 to another number 0-9 or ✱ if required. You can
also switch remote start off.
repeatedly until the display shows INSTALLATION then
1. Press
to display TEL. LINE SET-UP .
press
again. The display shows PUBL.LINE(PSTN ).
2. Press
repeatedly until the display shows REMOTE START:ON .
3. Press
4. To switch the code off, press
confirm.
Or
To change the code press
current code.
5. Enter the new code
on the keypad of your phone.
to scroll to OFF and press
or
. The display shows TYPE CODE above the
-
or
.
If connected to a switchboard, see page 72.
to
Additional settings
51
Advertisement
Table of Contents
