To Set Announce Only; Volume - BT PaperJet 35 User Manual

To set Announce Only

You can set your answering machine to Announce Only where callers
will hear your OGM #1 but your machine will not record their messages.
This enables you to leave an information announcement. You will still be
able to receive faxes.
When the machine is in standby, press
shows TAD SET-UP .
1. Press .
2. Press repeatedly until the display shows ANNOUNCE ONLY .
3. Press . The display shows ANNOUNCE ONLY:OFF .
4. Press or to display ON .
5. Press to confirm, your OGM 1 is replayed.
The display now shows LIFT HANDSET .
You can now record a new OGM 1 if required.
6. Lift the handset.
7. Press to begin recording. Replace handset to end recording.
8. Press to return to standby.

Volume

During playback of incoming messages and memos you can adjust the
speaker volume.
1. During playback, press
display shows the volume level.
BT PaperJet 35 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672
repeatedly until the display
repeatedly. The bottom right corner of the
Using the answering machine 37