Ingenico iWL250B Quick Reference Manual page 6

Card number is a numeric data item. To enter the value "544619999," press [5], [4], [4], [6], [1], [9], [9], [9] and [9] on the
keypad.
Then press [Enter] to confirm the data entered. The terminal then starts validation.
For amount entries, the terminal initially displays $0.00. For example, to enter the value "$5.30," press [5], [3] and [0]. No
decimal point is entered.
Then press [Enter] to confirm the data entered. The terminal then starts validation.
Text Data Entry
When performing data entry into text-only fields, the terminal keypad automatically defaults to all alpha characters.
Alphanumeric Data Entry
: When performing data entry on screens that accept both
NOTE
alpha and numeric characters, the method of using a shift
key "F" to access the alpha characters and special
characters is implemented. By pressing the numeric key first
and then pressing the "F" key, you can scroll through all
characters programmed on that key.
The Administrator key is also designated for other special characters; it is marked with a period, comma, # (pound) and *
(asterisk). To select one of the special characters, press that key and then press the 'F' key until the desired character
appears.
An alphanumeric data entry example is shown below:
Footer 1 is an optional alphanumeric data item from zero to 24 characters. The following example shows how to enter the
message "Open 24HR" using multiple key presses.
Step
1
2
TRANSACTION NAME
Card Number
[544619999]
TRANSACTION NAME
Enter Sale
Amount
FOOTER S
Enter Footer 1
Amount
Terminal Display
FOOTERS No action.
Enter Footer 1
[]
FOOTERS Press [6] once.
Enter Footer 1
Press [F] key three times.
[O]
[$5.30]
[]
Merchant Action
6