Connecting To A Switchboard - BT PaperJet 55 User Manual

Connecting to a switchboard

You can store the access code required to get an
outside line so that you only have to press the
button.
With some switchboards you may also need to switch
your PaperJet 55 from TONE dialling to PULSE
dialling. Check with your switchboard manager or
supplier to see if this is necessary.
While your PaperJet 55 is in standby mode
Press the
Function
F
shows
Display shows
Start
Display shows
Start
Press until the display shows
Volume
Display shows
Start
Press to switch between
Volume
Press to confirm. Display shows
Start
button until the display
and .
Press the buttons to display the options:
Volume
or . If your access code is
recall choose . If your access code is a
digit(s) choose
Press to confirm your choice.
Start
If you select
code needed to get an outside line via your
switchboard (max. three digits).
0 - 9
Enter your code.
To confirm.
Start
Display shows
Press to switch between
Volume
settings to suit your switchboard.
To confirm.
Start
To return to standby.
Stop
.
you are asked for the
and
37