Table of Contents
Advertisement
Your machine is pre-set to STD resolution
for faxing and copying. You can change this
setting so that the resolution is
automatically set to FINE.
When the machine is in standby
Function
Press until the display shows
F
To display
Start
Function
To display
F
Press until the display shows
Start
To switch between
Volume
To confirm.
Start
To return to standby.
Stop
Place document face down in the document
feeder.
If necessary set the Contrast and
Resolution settings.
Use the keypad to dial the number you
0 - 9
want.
Press the
dialled before your fax is scanned and sent.
Start
When the fax has been sent, the display
shows
successful transmission.
16
and
.
button. The number is
to confirm a
If you make a mistake when entering a number,
press the
buttons to move the cursor over the
digit and enter the correct digit. To delete the whole
number press the
button.
All dialling is shown using
use one-touch or speed dialling if they are set.
Place document face down in the document
feeder.
If necessary set the Contrast and
Resolution settings.
Press the
dialling tone over the loudspeaker.
Monitor
0 - 9
Use the keypad to dial the number you want.
When you hear the far end machine
respond press the
Start
scanned and sent.
When the fax has been sent, the display
shows
successful transmission.
keypad. You can also
button. You hear the
button. Your fax is
to confirm a
Advertisement
Table of Contents
