Connecting To A Switchboard - BT 65 User Manual

Connecting to a switchboard

You can store the access code required to get an
outside line so that you only have to press the
button.
With some switchboards you may also need to switch
your PaperJet 65 from TONE dialling to PULSE
dialling. Check with your switchboard manager or
supplier to see if this is necessary.
While your PaperJet 65 is in standby mode
Press the
shows
Display shows
Display shows
Press until the display shows
Display shows
Press to switch between
Press to confirm. Display shows
46
button until the display
and .
Press the buttons to display the options:
or . If your access code is
recall choose . If your access code is a
digit(s) choose
Press to confirm your choice.
If you select
code needed to get an outside line via your
switchboard (max. three digits).
0 - 9 Enter your code.
To confirm.
Display shows
Press to switch between
settings to suit your switchboard.
To confirm.
To return to standby.
.
you are asked for the
and