Connecting To A Switchboard - BT PaperJet 50 User Manual

PaperJet 50 User Guide 26/7/01

Connecting to a switchboard

You can store the access code required to get an
outside line so that you only have to press the
EXTERNAL button.
With some switchboards you may also need to switch
your PaperJet 50 from TONE dialling to PULSE
dialling. Check with your switchboard manager or
supplier to see if this is necessary.
To set the dialling mode and access
number
While your PaperJet 50 is in standby mode
Press the Function button until the display
Function
F
shows INSTALLATION
Display shows TEL.LINE SET-UP
Start
Display shows PUBL. LINE (PSTN)
Start
Press until the display shows PRIV. LINE
Volume
(PBX)
Display shows PBX DIAL: TONE
Start
Press to switch between TONE and PULSE .
Volume
Press to confirm. Display shows
EXT. LINE: PREFIX
Start
PaperJet 50 user guide – Edition 3 – 29.8.00
10:20 am Page 37
Press the < > buttons to display the options:
Volume
FLASH or PREFIX . If your access code is
recall choose FLASH . If your access code is a
digit(s) choose PREFIX .
Press Start to confirm your choice.
Start
If you select PREFIX you are asked for the
code needed to get an outside line via your
switchboard (max. three digits).
0 - 9
Enter your code.
To confirm.
Start
Display shows PSTN DIAL: TONE
Press to switch between TONE and PULSE
Volume
settings to suit your switchboard.
To confirm.
Start
To return to standby.
Stop
37