Table of Contents
Advertisement
Technical information
72
How many fax machines/telephones can you have?
All items of telephone equipment have a Ringer Equivalence Number (REN), which is used to calculate the number
of items which may be connected to any one telephone line. Your BT PaperJet 35 has a REN of 1. A total REN of 4
is allowed. If the total REN of 4 is exceeded, the telephone may not ring.
With different fax/telephone types there is no guarantee of ringing, even when the REN is less than 4.
Switchboard compatibility
This product is intended for use within the UK for connection to the public telephone network and compatible
switchboards which support tone dialling and timed break recall. If in doubt please consult your service provider.
To set the switchboard dialling mode and access code
You must set your BT PaperJet 35 for connection to a switchboard.
repeatedly until the display shows INSTALLATION then press
1. Press
2. Display shows TEL. LINE SET-UP . Press
to switch between PUBL.LINE (PSTN) and PRIV.LINE(PBX ). Press
3. Press
or
select PRIV.LINE(PBX) .
4. Set Tone or Pulse dial mode for your switchboard. Press
to switch between EXT. LINE PREFIX or EXT. LINE FLASH . If your access code to get an outside line is
5. Press
or
Recall, choose FLASH. If your access code is a digit(s), choose PREFIX. Press
you are asked for the code. Enter the code using the keypad and press
6. Set dial mode for the network (in the UK the network dial mode must be set to Tone). Press
switch between PSTN DIAL:TONE and PSTN DIAL:PULSE .
7. Press
to confirm.
8. Press
to return to standby.
Important: If you set the output mode to Flash, you simply need to press the
to get an outside line. You can then dial the number you want as normal. When you are using an
outside line the display shows E for external call.
.
to display TONE or PULSE . Press
or
.
. For use with a switchboard
.
to confirm. If you choose PREFIX,
.
. Press
button on your BT PaperJet 35
or
to
Advertisement
Table of Contents
