Reports And Lists - BT PaperJet 55 User Manual

Your PaperJet 55 prints the following reports
Always printed automatically.
– if a power failure occurs while a fax is being sent
or received the report gives you details about
that fax.
– if a power failure occurs before sending when a
document has been stored in the memory, or after
a fax has been received into memory and not
printed out, the report details the number of pages
lost from the memory and the date and time of
power failure.
Provides details of the last 42 faxes sent and
received. The report is printed automatically and
you can request an activity report at any time.
Provides confirmation of the results of the last fax
sent. You can set your PaperJet 55 to print a last
transmission report after every fax, every failed fax,
or upon request. The default is every failed fax.
Contains details about the last broadcast fax sent
(see page 25). It is printed automatically after each
broadcast fax. You can switch this setting off. The
default is ON.
This is a report that is printed automatically when
you set a delayed transmission. It gives the number
dialled and the time of the transmission. The default
is OFF.
24
See page 41