Table of Contents
Advertisement
You can set your PaperJet 55 to send a fax
at a specific time in order to take advantage
of cheaper call rates or to allow for different
time zones.
Place document face down in the document
feeder.
If necessary set the Contrast and
Resolution settings.
Function
Press until the display shows
F
Press the
Start
Display shows
If using the 12 hour clock, press the
button to switch between
Press the
buttons to move the cursor.
Enter the time at which you want your fax
0 - 9
to be sent, e.g.
Display shows
Start
You can enter a number using the keypad, one
touch or speed dial memories. For one touch,
press the appropriate keypad button until
the entry appears in the display. For speed
dial, press speed dial followed by Code No.
Refer to pages 21 to 23.
Enter the number you want.
18
button.
for
and
for
.
.
and
.
Press to confirm. Display shows the time at
which the fax is due to be sent
Start
To cancel your pre-set fax transmission, press
the
button or remove the document from the
document feeder.
If you want to store the document in memory
for delayed faxing, see "To fax from memory" on
page 19.
You can set a new time and fax number.
Function
Press until the display shows
F
Display shows
Start
Display shows
Start
Either
Press to display
Volume
To confirm. The fax is cancelled and your
machine returns to standby.
Start
Or
Display shows
Start
Enter the new time at which you want your
0 - 9
fax to be sent, e.g.
Display shows
Start
Press to confirm. Display shows
Start
Advertisement
Table of Contents
