Table of Contents
Advertisement
Pull the cartridge towards the front of the machine
until you hear it click into position.
Close the cover.
If the display continues to show
the cartridge may not be installed properly. Open
the cover and check that the cartridge is correctly
orientated and clicked into position.
To replace the cartridge when it runs out of ink,
follow the instructions in the Maintenance Section
on page 44.
Should the message persist, you may need to clean
the electrical contacts and the carriage (see 'To clean
the print head', page 46).
12
Your PaperJet 55 automatically cleans the
print nozzles and prints a test page.
Once printed, the display shows
The printed sheet contains the following:
a
, to check ink flow and
the electrical circuits on the print head.
a set of
quality.
Check the numbered scale
. If none are present, the print head is
installed correctly and working normally.
1
Press
if the test print is acceptable.
Or
Press
to repeat the test.
0
If there is still a problem after printing three
test pages try:
changing the paper you are using, it may be
too porous.
removing and re-installing the print cartridge.
cleaning the electrical contacts and print
nozzles (see 'To clean the print head',
page 46).
replace the print head.
to assess print
Advertisement
Table of Contents
