Configure Ntp - HIKVISION DS-MP7608HN Series User Manual

Mobile Network Video Recorder User Manual
Figure 14-2 DST Settings
Step 3 Check Enable DST.
Step 4 Set the start time and end time for DST.
Step 5 Select DST bias.
Step 6 Click OK in DST settings interface.
Step 7 Click OK in Display Settings.

14.3 Configure NTP

Step 1 Go to Menu > Basic Settings > Network.
Step 2 Click Set of More Settings.
Step 3 Click Set of NTP.
Figure 14-3 NTP Settings
Step 4 Check NTP to enable the function.
Step 5 Enter Synchronization Interval.
Step 6 Enter the IP address of NTP Server.
Step 7 Click OK in NTP settings interface.
70