Configure Arming Schedule And Linkage Actions; Configure Detection Area - HIKVISION DS-MP7608HN Series User Manual

12.10 Configure Arming Schedule and Linkage Actions

Step 1 Click Handle to set the arming schedule and alarm linkage actions.
Step 2 Select the day from Arming Schedule dropdown list.
Step 3 Set the arming period for selected day.
Step 4 (Optional) Copy the current settings to other days in the week.
Step 5 Check to enable linkage actions.
 Full Screen Monitoring
When an alarm is triggered, the local monitor displays the video image from the alarming
channel configured for full screen monitoring.
 Audible Warning
Trigger an audible beep when an alarm is detected.
 Trigger Alarm Output
Trigger an alarm output when an alarm is detected.
Step 6 Click OK.

12.11 Configure Detection Area

Step 1 Click Area Settings.
Step 2 Drag to draw detection area.
Step 3 Optionally, right click to delete areas or set detection sensitivity.
Step 4 Right click and select Exit.
Mobile Network Video Recorder User Manual
Figure 12-10 Linkage Action
66