Chapter 8 Storage; Storage Settings; Format Hdd; Configure Overwrite - HIKVISION DS-MP7608HN Series User Manual

8.1 Storage Settings

8.1.1 Format HDD

Purpose:
A newly installed hard disk drive (HDD) must be initialized before it can be used.
Step 1 Go to Menu > Storage.
Step 2 Check the HDD to format.
Step 3 Click Format.

8.1.2 Configure Overwrite

Purpose:
The overwrite function is enabled by default. If the function is disabled, the recording and
capturing will be stopped when the storage device is full.
Step 1 Go to Menu > Storage.
Mobile Network Video Recorder User Manual

Chapter 8 Storage

Figure 8-1 Storage Management
44