Configure Pppoe; Configure Ntp - HIKVISION DS-9600NI-I8 Series User Manual

Go to System > Network > TCP/IP > DDNS.
Check Enable.
Select DynDNS under DDNS Type.
PeanutHull and NO-IP are also available under DDNS Type, and required information should be
entered accordingly.
Enter Server Address for DynDNS (i.e., members.dyndns.org).
Under Device Domain Name, enter the domain name obtained from the DynDNS Website.
Enter the User Name and Password registered in the DynDNS Website.
Click Apply.

Configure PPPoE

If the device is connected to the Internet through PPPoE, you need to configure the user name and
password accordingly under System > Network > TCP/IP > PPPoE.
Contact your Internet service provider for details about PPPoE service.

Configure NTP

Purpose
Network Video Recorder User Manual
DDNS Settings
158