HIKVISION DS-MP7608HN Series User Manual page 14

Purpose:
Perform the following steps to install the HDD on the device. Figures in following steps are
only for reference.
Step 1 Insert the key and turn counterclockwise to unlock dummy HDD.
Step 2 Unfasten the two screws of dummy HDD and pull dummy HDD out of device.
Step 3 Use cross screwdriver to loosen the two screws and remove them, and then take the
dummy HDD apart.
Mobile Network Video Recorder User Manual
Figure 2-2 Tools
Dummy HDD
Unfasten Screws
Figure 2-3 Pull Dummy HDD out
13