Configure G-Sensor Alarm - HIKVISION DS-MP7608HN Series User Manual

Step 6 Click Set of Display Channel and select display channels. The device positioning
information will be displayed on the selected channels.
Step 7 Click OK.
Step 8 Optionally, go to Menu > Status > Position to view positioning status.

12.9 Configure G-Sensor Alarm

Purpose:
G-Sensor detects and records acceleration information in 3-axial (X, Y, Z) directions.
Before you start:
Connect an external sensor to the device for obtaining and providing the acceleration speed
in 3-axial directions.
Step 1 Go to Menu > Basic Settings > G-Sensor.
Step 2 Select G-sensor mode under Module.
 RS-232: The G-sensor is connected to the device through RS-232 interface.
 Built-in: The G-sensor is built in the device.
Step 3 Set the limit value for acceleration alarm in X, Y and Z directions.
X, Y and Z represent the direction of acceleration and the unit of alarm value is G (G=9.8
2
m/s ).
Step 4 Set the linkage actions for acceleration alarm, including Audible Warning and Alarm
Output.
Step 5 Click OK.
Step 6 Optionally, go to Menu > Status > G-sensor to view the G-sensor status.
Mobile Network Video Recorder User Manual
Figure 12-9 G-Sensor Settings
65