4.1 Set Local Network
Step 1 Go to Menu > Basic Settings > Network.
Step 2 Select Ethernet Port to configure.
Network Interface 1: The network interface in front panel.
Network Interface 2: The network interface in rear panel.
Step 3 Enter the device IP Address, Subnet Mask, Default Gateway, DNS Server Address, and
Download Server IP.
Step 4 Optionally, click Set of More Settings to enable/disable LAN Sharing.
LAN Sharing: Enable the function to share 3G/4G network to network interface.
The IP address of the device should be unique in the network and the default value is
192.168.1.64.
Step 5 Click OK.
4.2 Connect Wireless Network
4.2.1 3G/4G Dialing
Before you start:
Install a 3G/4G SIM card on the device. Refer to 2.3 Install SIM Card for details.
Step 1 Go to Menu > Basic Settings > Dial.
Mobile Network Video Recorder User Manual
Chapter 4 Network
Figure 4-1 Local Network Settings
26