10.1 Mobile Surveillance Platform
Purpose:
The device can be remotely accessed via mobile surveillance platform. For details of platform
configuration, you can refer to platform user manual.
When your device and mobile surveillance platform are not in the same network segment,
network priority: 3G/4G network > Wi-Fi > wired network.
Before you start:
Create the device ID on the mobile surveillance platform.
Step 1 Go to Menu > Basic Settings > Platform.
Step 2 Check Platform Enable.
Step 3 Select Platform as eHome.
Step 4 Configure the following parameters.
Server Address Type: IP Address and Domain Name are selectable.
Server IP: Enter the static IP address of iVMS server.
Port No.: The default value for mobile surveillance platform is 7660.
Device Register ID: The ID of the device registered on the eHome platform. If you leave it
empty, device logs in to the platform with serial No.
Step 5 Click OK and reboot the device to activate the new settings.
Step 6 Optionally, go to Menu > Status > Platform to view the platform status.
Mobile Network Video Recorder User Manual
Chapter 10 Platform
Figure 10-1 Platform Settings
54