Step 2 Select Alarm Output No.
Step 3 Enter Alarm Name.
Step 4 Select Dwell Time.
Dwell Time: Alarm output will keep alarming for the dwell time.
Step 5 Click Set of Schedule to set the arming schedule for alarm outputs. For detailed steps,
refer to 12.10 Configure Arming Schedule and Linkage Actions.
Step 6 Click OK.
12.4 Configure Alarm Terminal
Step 1 Go to Menu > Other Settings > Alarm Terminal.
Step 2 Check Enable Alarm Terminal.
Step 3 Edit the Terminal Name.
Step 4 Select the alarm outputs to trigger.
Step 5 Click OK.
Mobile Network Video Recorder User Manual
Figure 12-3 Alarm Output Settings
Figure 12-4 Alarm Terminal
61