Configure Pppoe; Configure Ntp - HIKVISION DS-96064NI-I16 User Manual

Configure PPPoE

If the device is connected to Internet through PPPoE, you need to configure user name and
password accordingly under System > Network > TCP/IP > PPPoE.
Contact your Internet service provider for details about PPPoE service.

Configure NTP

Purpose
Connection to a network time protocol (NTP) server can be configured on your device to ensure
the accuracy of system date and time.
Go to System > Network > TCP/IP > NTP.
Check Enable.
Configure NTP settings as need.
 Interval (min): Time interval between two time synchronization with NTP server.
 NTP Server: IP address of the NTP server.
 NTP Port: Port of the NTP server.
Click Apply.
Network Video Recorder User Manual
142
NTP Settings