Remote Voltage/Amperage Control - Miller Trailblazer 325 Diesel Owner's Manual

6-6. Remote Voltage/Amperage Control

2
1
Connect Remote
V/A Control To Re-
mote Receptacle
RC4
OM-258900 Page 36
.
Complete Parts List available at www.MillerWelds.com
Set V/A Control
Set Process
(Mid-Range: About 160 A)
1 Remote Receptacle RC4
Connect optional remote voltage/
amperage (V/A) control to RC4
(see Section 5-9).
2 Process/Contactor Switch
With remote control connected,
weld output in Stick or TIG is deter-
mined by a combination of front
panel and remote control voltage/
amperage settings. In Wire, weld
output is controlled through remote
control only.
In Example:
Process = Stick (Using Remote On/Off)
Min = 30 A CC/DC
Max = 160 A CC/DC
OR
Max (160 A DC)
Min (30 A DC)
Adjust Remote V/A Control
(Stick Welding Only)
259 872 / 248 009−A / S-0769 / S-0774