Miller Trailblazer 325 Diesel Owner's Manual page 38

Wire feeder connects to
Remote 14 receptacle
OM-258900 Page 34
.
Complete Parts List available at www.MillerWelds.com
Not
Active
Not
Active
Not
Active
SOFT
L (0)
STIFF
SOFT
L (0)
STIFF
Lift Arc start. Optimum for flat joint to end weld with crater fill, allow-
ing for addition of filler, without loss of shielding gas
Lift Arc start. Preset maximum current. Unit automatically pulses
maximum output 40% of the time and 25% of peak output for 60%
of the time based on 100 pulses per second. Meters display aver-
age output. Auto Stop feature allows arc to be broken without loss
of shielding gas.
No Lift Arc start; use external high-frequency device or scratch start
TIG
Flat or horizontal welds with XX18 electrode with short weld cables
Starting point for XX18, XX13, XX14, XX24, and XX22 electrodes
Starting point for XX10 and XX11 electrodes
Starting point for stainless steel wire (high inductance)
Starting point for mild steel wire
Starting point for aluminum wire (low inductance)