Duty Cycle; Static Output Characteristics - Miller Trailblazer 325 Diesel Owner's Manual

4-5. Duty Cycle

4-6. Static Output Characteristics

The static output characteristics (voltage with respect to amperage) of the welding power source can be described as flat during the GMAW process
and drooping during the SMAW and GTAW processes. Static characteristics are also affected by control settings (including software), electrode,
shielding gas, weldment material, and other factors. Contact the factory for specific information on the static characteristics of the welder/generator.
.
Complete Parts List available at www.MillerWelds.com
1
1 100% Duty Cycle
Duty cycle is the percentage of 10
minutes that unit can weld at rated
load without overheating.
.
This unit is rated at 325 amperes
DC for continuous welding.
NOTICE − Exceeding duty cycle can
damage unit and void warranty.
260 048-A
OM-258900 Page 19